* Chandelier with the power cord cross section is small and the use of power is too large, so that the wire fever.
* The socket is pressed by the flammable material or dust is caused to cause a short circuit, or installed in a flammable and explosive dangerous place, insert or unplug the plug to cause a spark to explode.
* Plug damage is not timely replacement, with a bare wire instead of plug use, resulting in short circuit or spark, causing combustible fire.
* Some of the bedside switch in use after a release, the switch hit the bed frame or wall leaving the outer insulation layer is damaged, most likely cause short circuit.
* The working voltage and operating current of the lamp holder do not match the power of the socket used. Long-term overload, if the temperature is too high will cause a fire.
* Flattened or screwdriver socket or multi-eye socket with the wire end of the insulation stripping. Too long, the exposed part of the short circuit; too short, bad conductor contact, contact resistance is too large, overheating caused by fire.
* In the process of installing the lamp holder, twist the lamp holder and twist the wire together, or the exposed core is too much, and then spread to the other end and cause a short circuit.
* Improper installation of the switch, especially the installation of the switch on the combustible object, the lead wire at the lead wire was scratched, so that the core exposed or water vapor infiltration, resulting in short circuit, or switch off when the arc caused by fire.
* The switchboard is not in the box, the fuse will be hot when the hot metal particles splashed, so that the following combustible material caused by combustion.
* The combustible gas used by the household is leaking from the pipeline or the valve so that the combustible gas is mixed with the air to reach the explosion limit. When the combustible gas is opened or closed, there is no electrical switch of the arc suppression device, which may cause a fire or explosion.
* Plug damage is not timely replacement, with a bare wire instead of plug use, resulting in short circuit or spark, causing combustible fire.
* Some of the bedside switch in use after a release, the switch hit the bed frame or wall leaving the outer insulation layer is damaged, most likely cause short circuit.
* Flattened or screwdriver socket or multi-eye socket with the wire end of the insulation stripping. Too long, the exposed part of the short circuit; too short, bad conductor contact, contact resistance is too large, overheating caused by fire.
* Improper installation of the switch, especially the installation of the switch on the combustible object, the lead wire at the lead wire was scratched, so that the core exposed or water vapor infiltration, resulting in short circuit, or switch off when the arc caused by fire.
* The switchboard is not in the box, the fuse will be hot when the hot metal particles splashed, so that the following combustible material caused by combustion.
No comments:
Post a Comment