Glass brick partition wall construction points:
Glass brick masonry should be equipped with two f6 ~ f8 reinforced on the basis of. Foundation height should not be greater than 150mm, width should be greater than the glass brick thickness of 20mm or more.
Glass partition wall at the top and ends of the application of metal profiles, the worse the width of the brick wall thickness should be greater than 10 ~ 18mm or more.
When the cut-off length or height is greater than 1500mm, in the vertical direction of each layer to set a layer of steel (when the length and height are more than 1500mm, set two bars); in the horizontal direction every three vertical joints set up a steel bar. Reinforcing into the slot not less than 35mm. Reinforced glass bricks cut off with a height of not more than 4m.
Glass partition wall and the metal profile should be left wings width of not less than 4mm slit, seam filled with linoleum; glass partitions and profiles should be left ventral width of not less than 10mm of expansion joints, so as to avoid damage to the glass brick partition wall.
The top layer of glass brick brick should be inserted into the top of the metal profile slot 10 ~ 25mm, so as to avoid the glass brick due to rigid extrusion and broken.
The joints between glass blocks shall be not less than 10 mm and not more than 30 mm.
Glass bricks and profiles, profiles and the junction of buildings, the application of elastic sealant seal.
Mirror glass wall construction process
1. The construction of mirror glass wall.
Glass fixing method:
(1) Drilling in the glass, with chrome-plated screws, copper screws to fix the glass frame and liner.
(2) with hardwood, plastic, metal and other materials to suppress the pressure of the glass.
(3) with the epoxy resin to the glass on the liner.
2. Mirror glass installation process:
Clean the grassroots → nail wooden skeleton → nail liner → fixed glass.
3. Precautions:
(1) uniform thickness of the glass should be 5 to 8 mm.
(2) installation is strictly prohibited hammering and prying, inappropriate when removed heavy.
Glass partition wall at the top and ends of the application of metal profiles, the worse the width of the brick wall thickness should be greater than 10 ~ 18mm or more.
When the cut-off length or height is greater than 1500mm, in the vertical direction of each layer to set a layer of steel (when the length and height are more than 1500mm, set two bars); in the horizontal direction every three vertical joints set up a steel bar. Reinforcing into the slot not less than 35mm. Reinforced glass bricks cut off with a height of not more than 4m.
Glass partition wall and the metal profile should be left wings width of not less than 4mm slit, seam filled with linoleum; glass partitions and profiles should be left ventral width of not less than 10mm of expansion joints, so as to avoid damage to the glass brick partition wall.
The top layer of glass brick brick should be inserted into the top of the metal profile slot 10 ~ 25mm, so as to avoid the glass brick due to rigid extrusion and broken.
The joints between glass blocks shall be not less than 10 mm and not more than 30 mm.
Glass bricks and profiles, profiles and the junction of buildings, the application of elastic sealant seal.
Mirror glass wall construction process
1. The construction of mirror glass wall.
Glass fixing method:
(1) Drilling in the glass, with chrome-plated screws, copper screws to fix the glass frame and liner.
(2) with hardwood, plastic, metal and other materials to suppress the pressure of the glass.
(3) with the epoxy resin to the glass on the liner.
2. Mirror glass installation process:
Clean the grassroots → nail wooden skeleton → nail liner → fixed glass.
3. Precautions:
(1) uniform thickness of the glass should be 5 to 8 mm.
(2) installation is strictly prohibited hammering and prying, inappropriate when removed heavy.
No comments:
Post a Comment